Typical Specifications :

 

Holder Type	HC-49/S ; SMU
Vibration Mode	Fundamental 3 rd Overtone
Nominal Frequency Range	3.2768 MHz ~ 30 MHz 30 MHz  ~ 70 MHz
Frequency Tolerance (at 25ºC ± 2ºC)	± 15 ppm to ± 100 ppm
Frequency Stability (reference to 25ºC)	± 15 ppm to ± 100 ppm
Operating Temperature Range	0ºC ~ + 50ºC to -20ºC ~ + 80ºC
Storage Temperature Range	-40ºC to +90ºC
ESR	see figure
Load Capacitance	12 pf to 32 pf or series
Shunt Capacitance	7 pf max
Drive Level	100 m W max
Aging Per Year	± 5 ppm typical
Crystal Cut	AT-CUT

Note :
1. HC-49/S has the same size of base and lead as of the HC-49/U Crystal Unit,
but with different height. There are two types of HC-49/S
Crystal Units as follows :

- Type 49/SS which is also called 49/3H with
height of 2.3 mm max

- Type 49/S3 which is also called 49/4H with
height of 3.6 mm max

2. Spesial Spesification other than above is on request.

Symbol Dimension (mm) A 49SS:2.3 max 49S3:3.6 max A1 11.1 max H 20.2 + 0.75 H1 49SS:23.25 max 49S3:24.55 max H2 11.2 ± 0.75 T 4.64 max d Ø 0.45 ± 0.05 P 12.7 ± 1.0 P0 12.7 ± 0.3 P1 3.85 ± 0.73 P2 6.35 ± 1.3 F 5 ± 0.8 h 0 ± 2.0 h1 0 ± 2.0 W 18 ± 1 / -0.5 W0 12.5 min W1 9 + 0.75/-0.5 W2 3 max D0 Ø 4.0 ± 0.2 t 0.7 ±0.2

 

 

Lead Length 1 13.2 ± 1.0 2 20.2 ± 1.0 3 Cust. Requirement